Breathable Polyester Cotton Blended Weaving Yarn Wholesale

Air-Permeability Tested OEKO-TEX Standard 100 Weaving-Optimized

Breathable Polyester Cotton
Blended Weaving Yarn

Purpose-built for shirting, bedding and home-textile looms — tested for finished-fabric breathability, not just yarn-level specs, with a smooth profile that keeps warp breaks low.

65/35
Polyester / Cotton Ratio*
20s–60s
Yarn Count Range
4–5
Color Fastness Grade
<3%
Warp Breakage Rate
Related Products

You May Also Like

View All Products
Introduction

Airflow-Focused Yarn for Shirting and Home Textile Weaving

Woven fabrics live or die by how they handle airflow — a shirt that traps heat or bedding that feels stuffy fails its most basic job. The Breathable Polyester Cotton Blended Weaving Yarn is developed specifically for loom performance and finished-fabric air permeability, rather than being a general-purpose yarn repurposed for weaving.

The fiber ratio is tuned toward cotton's natural breathability while retaining enough polyester structure to give the yarn the tensile consistency looms require for both warp and weft applications. Fine to medium counts are spun with a smooth, low-hairiness profile that reduces friction against heddles and reed during high-speed weaving.

Because breathability is measured at the finished-fabric level, we test woven swatches for air permeability alongside standard yarn metrics, giving weaving mills confidence that loom-floor performance will translate into the comfort characteristics their end customers expect.

Shirting mills favor this yarn specifically for warp applications where consistent tension and low friction matter as much as the finished fabric's breathability.
Air-Permeability Tested
Finished woven swatches are tested for airflow, not just the raw yarn, to confirm real breathability.
Smooth, Low-Hairiness Profile
Reduces friction against heddles and reed, supporting higher loom speeds with fewer warp breaks.
Warp & Weft Optimized
Twist and tension characteristics suited to both warp beam setup and weft insertion.
Cotton-Forward Comfort
A cotton-leaning ratio prioritizes the natural breathability and moisture absorption weaving customers expect.
Production Process

From Raw Fiber to Premium Yarn

1
Fiber Selection
Cotton-forward staple paired with polyester for tensile consistency
2
Fine Combing
Combing calibrated for smooth, low-hairiness warp-grade yarn
3
Precision Blending
65/35 ratio blending tuned for breathability and loom stability
4
Warp-Grade Spinning
Spun with tension profiles suited to warp beam requirements
5
Sizing & Packing
Optional sizing treatment for warp use, cone winding and export packing
Specifications

Product Specifications

Parameter Detail
Material Composition 65% Polyester / 35% Combed Cotton (Customizable)
Yarn Count Range 20s to 60s (Single or Plied)
Color Fastness Grade 4-5 (ISO Standard)
Luster Semi-Dull / Bright
Twist Direction S or Z Twist available
Moisture Regain Standard 3.0% - 4.5%
Tensile Strength Exceeds 400cN for 32s count
Hairiness Index H-value controlled below 4.0 (Uster)
Elongation at Break 12% - 15%
Fabric Air Permeability Tested on woven swatches, not yarn alone
Technical Performance

Performance Data

400+
cN (32s count)
Tensile Strength
<4.0
H-value (Uster)
Hairiness Index
4.0+
ISO Grade
Color Fastness to Washing
<3%
Warp Breakage
Loom Performance
IPI Faults: Low hairiness and controlled evenness reduce friction against reed and heddles, directly lowering warp breakage on high-speed looms.
Application

Where It Excels

Shirting Fabric
Fine to medium counts weave into crisp, breathable shirting suited for both formal and casual dress shirts.
Bedding & Home Textiles
Woven sheeting and pillowcase fabric benefit from the yarn's airflow and soft cotton-forward hand-feel.
Curtains & Soft Furnishings
Medium counts suit decorative and functional home-textile weaving applications.
Warp Beam Production
Low hairiness and consistent tension make this yarn a reliable choice for high-volume warp beam setup.
Advantages

Why Choose This Yarn

  • 1
    Verified Fabric-Level Breathability
    Air permeability is tested on woven swatches, not just estimated from yarn composition.
  • 2
    Lower Warp Breakage
    Smooth, low-hairiness fiber profile reduces friction against heddles and reed during weaving.
  • 3
    Consistent Loom-Floor Tension
    Even yarn structure supports stable warp beam tension across long production runs.
  • 4
    Comfortable, Natural Hand-Feel
    Cotton-forward ratio keeps woven fabric feeling soft and breathable rather than purely synthetic.
  • 5
    Wide Count Range for Flexibility
    Spans 20s to 60s, covering everything from heavier home textiles to fine shirting fabric.
Usage Tips

Getting the Best from Your Yarn

Weaving Recommendations: For warp applications, we recommend a light sizing treatment to further reduce friction during high-speed weaving above 600 rpm.

Weft Settings: As weft yarn, slightly reduce shuttle or rapier tension compared to 100% polyester to preserve the softer cotton-forward hand-feel.

Storage & Handling: Maintain relative humidity between 55–65% on the weaving floor to keep yarn moisture regain consistent and reduce static.

Dyeing Notes: For solid shirting colors, dye the polyester component first with disperse dyes at 130°C, then finish with reactive dyeing for the cotton portion.

Pro Tip: For premium shirting programs, request our fine-count (50s-60s) variant, which produces a noticeably crisper, higher-end fabric hand.
Sustainability & Traceability

Transparent. Traceable. Responsible.

Consistent, well-documented fiber sourcing supports weaving mills that need predictable performance across large production volumes.

Controlled Fiber Sourcing
Cotton and polyester lots are sourced from vetted suppliers with consistent quality documentation.
Water-Conscious Dyeing Support
We advise weaving mills on dye process parameters that reduce water and energy consumption downstream.
Batch Traceability
Every cone carries a lot number linked back to spinning date, fiber source and quality test records.
Quality Standards

Global Quality Standards Comparison

Our yarn is benchmarked for both standard textile metrics and weaving-specific performance like warp breakage and fabric air permeability.

Testing Item Standard Requirement Our Performance
Uster Evenness (CVm%) Top 25% Statistics Top 10% Industry Leading
Warp Breakage Rate Standard Level Below 3% on High-Speed Looms
Chemical Safety REACH / RoHS OEKO-TEX Standard 100 Certified
Fabric Air Permeability No Formal Benchmark Tested on Woven Swatches
Company

Nantong Double Great Textile Co., Ltd.

150,000㎡
Factory area of 146,000㎡
120+
Technical personnel
150,000+
Factory spindles

Nantong Double Great Textile Co., Ltd. is a China Breathable Polyester Cotton Blended Weaving Yarn Manufacturers and Wholesale Breathable Polyester Cotton Blended Weaving Yarn Factory, a cotton spinning enterprise specializing in the production of high-quality yarns. It is the national base for the production of high-quality chemical fiber blended yarns, the national base for the research of knitting yarns, the national base for the development of differentiated green yarns, one of the top 20 producers of polyester short fiber yarns, and a vice chairman unit of the Chinese Cotton Textile Industry Association.

The company mainly produces pure and blended yarns of cotton, polyester, acrylic, eco-friendly viscose, recycled polyester, modal, ECDP, PLA, etc., as well as functional yarns such as nylon graphene, Coolmax, Coolvisinos, ramie, and yak.

The company insists on the business philosophy of "using rigorous management to spin high yarns and attract high-end customers". It has become a supplier for international fashion brands such as LV, H&M, Adidas, and Uniqlo. The company has introduced advanced international equipment from Switzerland, Germany, and Japan. It has the advanced USTER testing equipment and has passed the USTERIZED quality system certification.

The company's laboratory has CNAS accreditation. It is the innovation center for new fiber spinning in the national textile industry, with the Jiangsu New Fiber Spinning Engineering Technology Research Center and the Double Great Research Institute. The company has developed more than 50 new products at the provincial level or above, holds more than 40 national invention patents.

The company upholds the mission of "Every yarn is a ray of sunshine", sets the vision of "Life in the warp and weft, Double Great Textile lasts forever", adheres to the core values of "Innovation, Quality, Integrity, Harmony".

Trusted Partners

Our Strengths, Your Competence

Supplying the world's leading fashion and sportswear brands with consistent quality at scale.

Partner Brand
Partner Brand
Partner Brand
Partner Brand
Payment & Shipping

Logistics & Terms

Payment Terms
  • L/C at sight
  • T/T (30% deposit, balance before shipment)
  • Western Union for sample orders
Shipping Information
  • Shipping Ports: Shanghai or Qingdao Port, China
  • Available via sea freight, air freight, or international express for small batches
  • All shipments are palletized with moisture-proof wrapping
Order Information

Comprehensive Info

MOQ
700 KG per color/spec
Lead Time
14 – 22 Days
Packaging
Export Carton / PP Bag / Palletized
Certifications
OEKO-TEX Standard 100, ISO9001
Raw Materials
Polyester Staple + Combed Cotton
Customization Options
Blend ratio · Count · Sizing treatment · Color
FAQ

Frequently Asked Questions

QHow is breathability actually verified for this yarn?
We weave test swatches and measure air permeability on the finished fabric, rather than relying on yarn composition alone.
QIs this yarn suitable for both warp and weft use?
Yes, it's engineered with tension and twist characteristics suited to both warp beam setup and weft insertion.
QWhat counts are available for shirting fabric?
We offer fine counts up to 60s for crisp shirting, alongside coarser counts for heavier home textiles.
QDoes this yarn reduce loom downtime?
Yes, its low hairiness and consistent evenness reduce friction against heddles and reed, lowering warp breakage rates.
QCan the blend ratio be adjusted for more breathability?
Yes, we can shift the ratio toward a higher cotton share for mills prioritizing breathability over synthetic durability.
QWhat is the minimum order quantity?
Standard MOQ is 700kg per color and specification.
QDo you offer sizing treatment for warp use?
Yes, a light sizing treatment is available on request to further reduce friction during high-speed warp weaving.
QIs this yarn suitable for bedding and home textiles?
Yes, medium counts are commonly used for woven sheeting, pillowcases and other home-textile applications.
QHow is color consistency maintained across large weaving orders?
We use computerized color matching and strict lot control to minimize shade variation across bulk orders.
QCan I request a sample to test on my own loom?
Yes, we provide 1–2kg of stock yarn for warp or weft trials before committing to bulk production.

Still have questions?

Our textile engineers are ready to help you find the perfect yarn specification for your project.

Contact Our Team

Request a Sample

Get 1–2kg of stock yarn for your initial sampling and quality evaluation.

Free sample available
Express shipping worldwide
Full test report included
Get Free Sample
Related Information

Industry Insights & Resources

Get Airflow Right From the Loom Up

From warp trials to bulk weaving orders, our team supports every stage of your shirting or home-textile production line.

Get a Quote Download Catalog