A durability-first yarn built for workwear, canvas, bags and industrial textiles where surface friction is a daily reality, not an occasional stress test.
Workwear, canvas, bags, and heavy-duty upholstery all share a common enemy: surface friction that wears fabric thin over time. The Abrasion Resistant Polyester Blended Textile Yarn is built around high-tenacity polyester fiber with a reinforced surface structure, spun specifically to survive repeated rubbing, flexing and mechanical stress.
The fiber selection process prioritizes wear life over softness. High-denier polyester staple is blended with a durability-focused secondary fiber and spun at a tighter twist than typical apparel yarns, producing a denser, more compact strand that resists surface fibrillation under abrasive contact.
Every production lot is Martindale-tested to confirm abrasion cycle counts before it leaves the mill, giving industrial buyers a documented performance baseline rather than a marketing claim. This yarn is the choice when a fabric needs to survive years of hard use, not just look good on day one.
| Parameter | Detail |
|---|---|
| Material Composition | 80% Polyester / 20% Durability Blend (Customizable) |
| Yarn Count Range | 10s to 24s (Single or Plied) |
| Abrasion Resistance | 40,000+ Martindale Cycles |
| Luster | Semi-Dull (industrial-grade finish) |
| Twist Direction | S or Z Twist, higher twist factor |
| Moisture Regain | Standard 1.0% - 2.5% |
| Tensile Strength | Exceeds 600cN for 16s count |
| Hairiness Index | H-value controlled below 5.5 (Uster) |
| Elongation at Break | 16% - 20% |
| Surface Fibrillation | Minimal fiber lift after repeated abrasive contact |
Weaving Recommendations: For canvas and heavy-duty wovens, use a firm beat-up setting to maximize fabric density and further improve abrasion performance at the fabric level.
Knitting Settings: When knitted into technical fabrics, slightly looser tension helps preserve the yarn's compact twist structure through the looping process.
Storage & Handling: Standard synthetic-yarn storage conditions apply; no special humidity control is required given the yarn's low moisture regain.
Dyeing Notes: Disperse dyeing is standard for the polyester majority; darker industrial shades typically achieve the best colorfastness results.
Durability itself is a sustainability feature — fabric that survives longer means fewer replacement cycles and less textile waste over a garment's lifetime.
Abrasion and strength testing far exceed standard apparel benchmarks, reflecting the industrial-grade end-uses this yarn is built for.
| Testing Item | Standard Requirement | Our Performance |
|---|---|---|
| Martindale Abrasion Cycles | Standard 20,000 Cycles | 40,000+ Industry Leading |
| Breaking Strength (16s) | Standard 450cN Minimum | 600cN+ Industrial Grade |
| Chemical Safety | REACH / RoHS | REACH Compliant, RoHS Verified |
| Surface Fibrillation Resistance | No Formal Benchmark | Minimal Fiber Lift After Testing |
Nantong Double Great Textile Co., Ltd. is a China Abrasion Resistant Polyester Blended Textile Yarn Manufacturers and Wholesale Abrasion Resistant Polyester Blended Textile Yarn Factory, a cotton spinning enterprise specializing in the production of high-quality yarns. It is the national base for the production of high-quality chemical fiber blended yarns, the national base for the research of knitting yarns, the national base for the development of differentiated green yarns, one of the top 20 producers of polyester short fiber yarns, and a vice chairman unit of the Chinese Cotton Textile Industry Association.
The company mainly produces pure and blended yarns of cotton, polyester, acrylic, eco-friendly viscose, recycled polyester, modal, ECDP, PLA, etc., as well as functional yarns such as nylon graphene, Coolmax, Coolvisinos, ramie, and yak.
The company insists on the business philosophy of "using rigorous management to spin high yarns and attract high-end customers". It has become a supplier for international fashion brands such as LV, H&M, Adidas, and Uniqlo. The company has introduced advanced international equipment from Switzerland, Germany, and Japan. It has the advanced USTER testing equipment and has passed the USTERIZED quality system certification.
The company's laboratory has CNAS accreditation. It is the innovation center for new fiber spinning in the national textile industry, with the Jiangsu New Fiber Spinning Engineering Technology Research Center and the Double Great Research Institute. The company has developed more than 50 new products at the provincial level or above, holds more than 40 national invention patents.
The company upholds the mission of "Every yarn is a ray of sunshine", sets the vision of "Life in the warp and weft, Double Great Textile lasts forever", adheres to the core values of "Innovation, Quality, Integrity, Harmony".
Supplying the world's leading fashion and sportswear brands with consistent quality at scale.




The company has passed system certifications including quality, environment, occupational health and safety, measurement, energy, integration of industrialization and information technology, IATF16949, and GRS/OCS.
























Recognized by national and industry authorities for excellence in quality, innovation, and corporate responsibility.
Our textile engineers are ready to help you find the perfect yarn specification for your project.
Contact Our TeamGet 1–2kg of stock yarn for your initial sampling and quality evaluation.
Talk to our engineers about abrasion cycle targets, blend customization and bulk pricing for your industrial textile program.